The OKI RG7 recycler cassette earns its reputation through a combination of mechanical precision, wide model compatibility, and documented operational consistency. Designed for OKI 21SE, 6040W, and YH series ATMs, this cash recycling module handles 30–60 banknotes per cycle at a dispatch rate of 2–3 notes per second, maintaining a claimed 98% operational uptime. Built with high-impact polycarbonate housing and short-path transport technology, it keeps jam rates low even in high-volume environments. For third-party ATM operators and integrators, those numbers translate directly into fewer service calls and lower annual maintenance costs.


Because it's so small—120 mm long, 22 mm wide, and 10 mm thick—the RG7 can fit into OKI machine bays that are already in place without any structural changes. The bill doesn't have to travel as far inside the mechanism because of its short-path transport design. It makes the points of contact less likely to stick and misfeed. It is important that the polycarbonate shell doesn't let dust or small impacts through in the field, where dust and humidity can be very hard on things.
The module can hold 30 to 60 notes, depending on how thick they are and what they are made of. There are friction rollers that move both paper money and polymer notes. It has adaptable tensioning, which means that the grip strength changes all the time. Two to three notes per second is a fast enough rate of delivery for a medium-sized bank store to meet customer needs without putting too much stress on the motor. Inside the machine, pressure monitors stop the feed loop before it gets too full and causes a jam.
So that mistakes don't happen between models, procurement teams need exact part numbers. In the table below, you can see the basic name and an alternate name for each type of cassette:
So, the part numbers for the Standard Recycling Cassette of the RG7 recycler cassette are YA4238-1052G314 through YA4238-1051G301 and YA4238-1052G311. The part numbers for the Reject/Retract Cassette are YX4238-5000G002 through YA4238-1052G351, and the ID number is 01885. The part numbers for the Cash-Out/Dispense Cassette are YA4229-4000G001 through 01886. The part number for the Recovery/Audit Cassette is YA4229-4000G013 and it has the following numbers on it:
| Component Type | Primary Part Number | Alternative Part Numbers | Compatible ID |
|---|---|---|---|
| Recycling Cassette (Standard) | YA4238-1052G314 | YA4238-1041G301, YA4238-1052G311 | — |
| Reject/Retract Cassette | YX4238-5000G002 | YA4238-1052G351 | ID01885 |
| Cash-Out/Dispense Cassette | YA4229-4000G001 | — | ID01886 |
| Recovery/Audit Cassette | YA4229-4000G013 | — | — |
You can be sure that it will work and cut down on returns if you make sure the part number matches before you buy it.
You can tell the RG7 is better than the RG6 by how fast it serves and how well it handles different types of media. On the RG6, you had to change the tension by hand when you switched between paper and polymer notes. The RG7's adaptable roller system takes care of the change on its own. Technicians in the field say that polymer money is getting fewer "double-feed" rejects. This is a problem that often happens in places that use both paper and plastic bills.
The unit cost up front is one thing that can change. One more time is once a year for cleaning. A lot of the time, people who run RG6 units plan to clean them every three months in dusty places. That amount of time is extended to about six months or 50,000 cycles, whichever comes first, since the RG7's transport path is sealed. That drop in normal repair costs alone makes up a big part of the price difference between the two generations over three years.
The OKI RG7 recycler cassette comes with a 30-day guaranty, and RM lets you get technical support online. You'll get an answer to your questions in 24 hours. A quick answer to technical questions is very helpful for people who run ATM networks that are spread out across multiple time zones. This is very important when an engineer in the field needs help from far away to fix a transport problem that just won't go away.
Most of the time, the technical head and the buying manager of an ATM developer sign off on the purchases together. The RG7 talks about the problems that each part brings up in the conversation.
In B2B buying reviews, these are the main points that keep coming up:
If you want to clean the wheels and optical sensors inside, you should use isopropyl alcohol and compressed air every six months or 50,000 drinks. Make sure the drive belts don't lose their stretch every year. When there is a lot of dust around, belts often get stuck because of debris building up on them. A planned service call costs a lot more than getting new belts before the old ones break.
There are holes in the RG7 recycler cassette case that can be used without any tools. To get to the note path and clear the jam by hand, open the colored latch doors. You don't need to call a service technician. When the jams come back after being cleared, it's most likely because the belts are worn out or the optical sensor isn't set up properly. Remote video support from RM can help you with both of these issues.
| Specification | Detail |
|---|---|
| Origin | Japan |
| Stock Status | In Stock |
| Compatible Models | OKI 21SE series, 6040W, YH series |
| Condition | Brand New or Refurbished (Excellent Condition) |
| Warranty | 30-Day Warranty with Online Support |
| Lead Time | 15–20 working days |
| Response Time | Within 24 hours |
Answer is based on three things: how well the models fit together, how often they are used, and how much upkeep they can handle. You can use it with 30 to 60 notes and a speed of 2 to 3 notes per second on your OKI 21SE, 6040W, or YH series machines that handle medium to high transaction loads. This is because they don't make the tools too much. People who work in dusty or wet places won't be as affected by these tapes because the transport path is sealed and the notes are compatible with polymers.
Newer shredder cassettes are a cheap way for ATM owners to get an extra three to five years out of old machines without having to buy new ones. The RG7 directly helps with that plan, and since RM keeps spares on hand, they show up during a planned maintenance window instead of after an unplanned outage.
The OKI RG7 recycler cassette's operational value can be judged by how well it documents part numbers, how well it handles different types of media, and how often it needs maintenance that lowers the total cost of service over its lifetime. RM's supply chain works well for buying teams that need to get ATM parts for markets in Latin America, Southeast Asia, Eastern Europe, or developing Africa. They have parts in stock, offer a 30-day guarantee, and have experts respond within 24 hours. But not all ATM models work well with RG7. For OKI 21SE, 6040W, and YH series lines, it is a well-known and tried-and-true choice that you should really think about.
A: RG7 works with OKI 21SE series, 6040W, and YH series ATMs, that much is certain. Always check the part number against the service manual for your machine before you order. As an example, the part number for the normal recycle cassette is YA4238-1052G314.
A: Yes. Different types of polymers and papers can have their tension changed by the adaptive friction-roller system. The host recycler's firmware may need to be updated so that the exact times when different types of money are separated can be fine-tuned.
A: Use rubbing alcohol and compressed air to clean the rollers and sensors every six months or every 50,000 times the machine is used. Check the drive belts for wear once a year.
A: The wait time for sea freight is usually between 15 and 20 work days. Get in touch with RM if you need faster air freight options right away.
A: The company RM promises that for 30 days, both new and used RG7 units will be free of any problems. They also offer online technical support and promise to answer any questions within 24 hours.
Yes, RM does offer live video support to help with setup and figure out what's wrong. You can get product docs in more than one language if you ask for them.
For more than 20 years, RM has sold ATM parts from its ISO9001-certified factory in Shenzhen. RM is a reputable company that sells OKI RG7 recycler cassettes. They have both new and used units in stock and ready to ship. Tony can be reached at Tony@atm-part.com to get a quote or talk to a technical expert about ATM parts.
1. ATMIA (ATM Industry Association). Global ATM Security Guidelines and Best Practices. 2022.
2. Dove Consulting. ATM Deployer Study: Operational Cost Benchmarks for Financial Self-Service. 2021.
3. RBR London. Global ATM Market and Forecasts to 2027. RBR Research, 2023.
4. International Organization for Standardization. ISO 9001:2015 Quality Management Systems — Requirements. ISO, 2015.
5. Diebold Nixdorf. Cash Recycling Technology: Field Performance and Maintenance Data Report. 2020.
6. Bank for International Settlements (BIS). Payment and Market Infrastructure Statistics: ATM Deployment Trends. BIS, 2022.
Learn about our latest products and discounts through SMS or email