The G610 recycler is one of the most dependable cash recycling modules available for self-service kiosk deployments today. Engineered in Japan and compatible with both Fujitsu and NCR systems, it handles bidirectional cash operations — deposit and dispense — within a single compact unit. For banks, ATM service providers, and parts distributors managing CRM or ITM networks, this module addresses the real cost and reliability pressures that come with high-volume cash automation. This article breaks down what makes the G610 worth serious consideration.
The G610 recycler module was made to work in places where accurate cash handling and long-lasting hardware are essential. Procurement teams can figure out if it meets their operational needs by looking at its core architecture.
The G610 has a small OEM form factor that makes it work with slim kiosk frames or normal 19-inch rack sizes. Depending on how the software is set up, it can handle between 4 and 8 bills per second. Each recycle box can hold between 100 and 500 notes on a cassette, so it can be used for both low- and high-volume tasks. The 009-0025324 / KD02155-D814 Recycle Cassette and the 009-0025045 GBRU Cassette can be used in these setups, along with parts like the lower transport assembly (KD02166-D959), reject cassette, and escrow device.
The identification unit uses magnetic, visual (infrared and ultraviolet), and thickness sensors to figure out the value and condition of each note. This multi-layer method gets a first-pass acceptance rate for used bills that is higher than 99%. The escrow function temporarily holds notes during a transaction, letting the transaction be canceled with exact note return. This is useful in retail and banking settings where transaction disputes need to be handled in a clean way.
This module works well because it can connect to both Fujitsu G610 series ATMs and NCR SelfServ platforms, which can be found by searching for NCR part numbers 009-0020383 and 009-0025029. This dual compatibility makes buying easier for service providers who manage teams with a mix of brands.
Picking the best cash recycling can change the daily costs, the amount of time the booth is up, and the total cost of ownership over many years of use. Here are the main benefits of this lesson that make it stand out in real life.
These features directly fix two of the most common operational problems in cash automation: schedules for frequent restocking and mistakes that happen when cash amounts don't match up. Operators who have put this G610 recycler module in retail POS lanes and bill payment kiosks have seen a noticeable drop in the number of service calls. This is mostly because the enclosed transport design keeps it from getting jammed in dusty environments.
When you compare the G610 to older Fujitsu models, like the G600 series, you can see the differences in three areas: the size of the cassette, the accuracy of the sensor, and the ability to support two different brands.
The G600 generation could do basic recycling tasks, but it didn't have the multi-sensor validation depth that the G610 did. The magnetic, optical, and thickness sensors in the G610 work together to make a more accurate fitness sort. This lowers the number of ATM-unfit notes that get back into the dispense pool, which is a regular audit problem in older systems.
Generic bill recyclers that aren't made by OEM companies often don't have ways to change their software to work with new series of bills. The G610 can receive firmware changes via USB, which lets users quickly adjust to new money designs, like polymer note transitions, released by central banks. This keeps the unit in line without having to replace any hardware.
Fujitsu OEM aftermarket modules cost a lot more than other modules. Third-party and refurbished G610 units, which can be bought in great shape from trusted suppliers, can cut down on the initial cost of purchase while still performing at tested levels. This gap grows over a five-year service cycle, especially for service companies that take care of 20 or more kiosks.
To get this module, you need to work with a supplier that has real stock and can give you more information than just a list of Products.
RM keeps a large stock of G610 recycler parts, such as sub-modules and cassettes. Most of the time, it takes 15 to 20 working days to get an order. Responses to inquiries are treated within 24 hours. Depending on the need for speed and the location, units are shipped by sea, land, or air.
You can choose from brand-new units or units that have been properly fixed up. There are several steps in the quality control process for refurbished units. These include MCBF stress testing, sensor tuning, and weather screening from 0°C to 50°C. RM (HONGKONG RONG MEI TECHNOLOGY CO., LIMITED) has been in the ATM parts business for over 20 years from its headquarters in Shenzhen, China. Every unit comes with a 30-day warranty and online and video remote support. ISO 9001:2008 approval is held by the company, which runs out of a 3,000-square-meter building with mold rooms, injection molding, a repair department, and a quality control department. RM has been a supplier of G610 series submodules for more than five years and has experience integrating Fujitsu and NCR systems.
RM (HONGKONG RONG MEI TECHNOLOGY CO., LIMITED) has operated in the ATM parts industry for over 20 years from its facility in Shenzhen, China. The company holds ISO 9001:2008 certification and operates across a 3,000 square meter facility that includes mold rooms, injection molding, a maintenance department, and a dedicated QC department. RM has supplied G610 series sub-modules for more than five years, with documented experience across Fujitsu and NCR system integrations.
Every six months or after 50,000 processing cycles, clean the magnetic and optical heads. Cleaning cards without alcohol and compressed air can be used to get rid of paper dust from the moving wheels. Cleaning products made from petroleum should not be used because they can damage rubber feed tires.
Friction pick rollers are wearable parts that should last between 200,000 and 500,000 notes in normal use. The rate of wear is affected by humidity and the type of note (polymer vs. paper). Instead of waiting for slip-related jams to happen, replace the rollers when they are due for their yearly service.
A new currency template file needs to be flashed to the unit's inner memory via USB every time the central bank prints a new series of notes. This process only takes a few minutes and lets the recognition unit check the new note designs right away, without having to make any hardware changes.
The G610 recycler meets the technical needs of current self-service cash processing without being too hard to use. It works with two different brands, has multiple sensor validation, an escrow function, and supports firmware updates, which give kiosk operators the tools they need to handle cash correctly in a variety of settings. This module gives you the performance level you need to keep costs low over the long term, whether you're in charge of a bank CRM network, a fleet of self-checkout machines, or a BTM rollout. With more than 20 years of experience in ATM parts, RM is a reliable source for checking suppliers, getting expert help, and getting good prices.
Yes. This module is cross-compatible with both Fujitsu G610 series machines and NCR SelfServ ATMs. The NCR cross-reference part numbers are 009-0020383 and 009-0025029. Confirm your host system firmware version before installation to ensure alignment.
The module supports the 009-0025324 / KD02155-D814 Recycle Cassette and the 009-0025045 GBRU Cassette. Each cassette is denomination-configurable via software.
Under standard operating conditions, a professionally refurbished unit can perform comparably to a new unit for three to five years with proper maintenance. MCBF benchmarks typically exceed 100,000 cycles for tested units.
RM provides 30-day warranty coverage, online troubleshooting support, and video remote assistance. Inquiry responses are handled within 24 hours.
Yes. RM supplies the full G610 sub-module range, including the lower transport assembly (KD02166-D959), reject cassette, and escrow mechanism as individual components.
Since more than 20 years ago, RM has sold Fujitsu and NCR-compatible ATM parts to banks, service providers, and wholesalers in North America, Europe, and the Asia-Pacific region. Get in touch directly if you need a verified G610 recycler provider with tested units in stock and expert help you can use. Email your question to Tony@atm-part.com, to see the full list of G610 parts. Buyers who meet the requirements can get bulk discounts and framework deals.
1. Retail Banking Research (RBR). Global ATM Market and Forecasts. 2023.
2. ATMIA (ATM Industry Association). Best Practices for Cash Recycling Technology in Self-Service Environments. 2022.
3. European Central Bank. Banknote Handling Standards and Fitness Sorting Requirements. 2021.
4. Fujitsu Frontech Limited. G-Series Cash Recycling Module Technical Documentation. 2020.
5. NCR Corporation. SelfServ ATM Hardware Integration Guide. 2022.
6. RBR London. Cash and Payment Networks: Global Forecasts to 2028. 2023.
Learn about our latest products and discounts through SMS or email