ATM AB Cassette Guide: Features, Uses and Buying Tips

share:
November 19,2026

If you manage Hitachi ATM fleets and need a reliable reject/retract solution, the AB cassette is exactly what your operation requires. This dual-compartment cash module separates Type A rejected notes from Type B customer-uncollected notes with 99.9% classification accuracy. Sourced from Japan and available in brand-new or refurbished condition, it addresses the spare parts gap left by Hitachi's phased exit from OEM servicing. This guide walks you through how the cassette works, what makes it worth buying, and how to choose the right supplier — so you can make a confident procurement decision.

blog-1-1blog-1-1​​​​​​​

Understanding the Hitachi ATM AB Cassette: How It Works

The AB cassette isn't like other dispense units. It's a special reject-and-retract module that sits inside the Hitachi ATM transport system and sorts notes into two different internal bins based on what the ATM's CPU thinks about each transaction.

Type A vs. Type B: The Core Distinction

Type A events are notes that the ATM refuses while issuing them. These could be notes that have been picked twice, have thickness mistakes, or have counterfeit recognition flags. Type B events happen when a customer leaves without taking the cash that was given to them. Each note is sent to the right bin in less than 50ms by a solenoid-driven diverter gate that is set off by the ATM's main CPU timing signal. By keeping fit and unfit currency separate, cross-contamination is avoided, which directly supports the cash dispute resolution audits that most banks require.

Key Internal Components and Part Numbers

The mechanical integrity of this module depends on subcomponents that are perfectly matched. Here is a table that shows the WAB/WBX setup that is used in all Hitachi ATM models:

Component Code Description
2P003988A / 2P004303B WBX-BX1-CBL ASSY
1P004481-001 AB BOTTOM BASE (RoHS/RB)
M7P040237A / 1P004088C AB door / WBX-DOOR ASSY
1P004013-001 WBX-REAR FRAME
1P004012-002 WAB-FRONT FRAME
1P003744-001 WBX-MID BASE
4P009166-001 CS 15T gear (D)
4P008886-001 WBX-S2M-Z22 PLY

It's important to get the part number right before placing an order. Different rail tolerances apply to the WAB and WBX sub-series. If you order the wrong frame, like a WAB-FRONT FRAME (1P004012-002) for a WBX configuration, the installation will fail on-site.

Why Classification Accuracy Matters

A 99.9% sorting accuracy rate means that there are fewer human recounts, fewer bank audit flags, and fewer disagreements about cassettes that require technicians to spend time on them. This level of accuracy also helps third-party ATM service companies that work under bank outsourcing contracts show that they are following the rules when clients ask for spare parts traceability paperwork.

Product Specifications at a Glance

Procurement leads and technical directors need to make sure that the unit they're looking for matches the model of the ATM that is already in place before they place an order. Here is a list of all the features that RM's AB cassette has:

Parameter Details
Product Name AB Cassette
Origin Japan
Stock Status In Stock
Compatible Systems Hitachi ATM
Condition Brand New or Refurbished
Warranty 30 days with online support
Lead Time 15–20 working days
Inquiry Response Within 24 hours

You can choose from both brand-new and used units. Before they are sent out, refurbished cassettes are checked for damage to the shutter mechanism, the latch, the tension on the belt on Y69608-044 (Belt S2M882), and the optical sensor. This is important for buyers in Latin America and Southeast Asia because the marking "Japan origin" on used units is taken into account during bank audits.

New vs. Refurbished: Which One Should You Order?

This is a question that ATM repair companies get asked all the time about an AB cassette, and the honest answer relies on how you run your business. The choice isn't just about how much it costs up front; it also affects how well your field technician does on the first install and how long your maintenance cycle is.

Here are the actual differences between each choice:

  • Brand-new units carry a full 30-day warranty, arrive with factory-sealed latches and door assemblies (including the WBX-DOOR ASSY M7P040237A), and are the better choice when deploying cassettes in high-transaction ATMs where cycle counts accumulate quickly.
  • Refurbished units cost less and are sourced from Japan-origin retired stock. Each unit is tested for diverter gate response, pusher plate reset, and latch closure torque. They suit lower-volume ATMs or scenarios where budget is constrained but OEM-equivalent performance is still required.
  • MOQ flexibility matters at this price point. RM accepts orders as low as one unit, which is ideal for first-time buyers who want to run a single-unit field test before committing to a larger batch.

Because of these differences, service companies can buy different kinds of units—new units for high-traffic bank offices and used units for rural or low-traffic locations—without losing the ability to track down parts.

How to Evaluate an AB Cassette Supplier

It takes longer than most buyers think to find the right AB cassette supplier. Hitachi's exit from ATM making in stages has made the aftermarket disorganized, and not all sellers of "Hitachi-compatible" tapes can prove their claims.

Verify Part Number Accuracy

Any supplier that is worth doing business with should be able to confirm compatibility at the level of individual parts. What are the differences between the WAB and WBX configurations? Also, make sure they have both 2P005409A (WAB-ENTGUIDE ASSY) and 2P004314-001 (WAB-USEPA BLOCK) in stock. Any answers that aren't clear about "universal compatibility" are a red flag.

Request a Sample Unit First

Usually, it takes three to six months from the first question to the framework deal for this kind of module. It is common to ask for one unit to be tested in the field before placing an order for 20–50 units. If a seller doesn't let you order samples, they probably won't be able to help you after the sale.

Confirm Warranty and After-Sales Support Terms

Most companies offer warranties that last for 30 days. Besides that, see if the seller offers online direct help for questions about installation. Dual-compartment systems are so complicated that even seasoned field techs need help aligning the cassettes when they are installing them for the first time.

Conclusion

The AB cassette has a clear and measured part to play in how Hitachi manages its ATM cash. It separates rejected notes from reversed notes, helps banks with auditing, and lowers the number of cash disputes that happen. For third-party ATM maintenance companies that work in places where Hitachi OEM support isn't available anymore, getting this module from a known, Japanese-based supplier is both the right thing to do technically and legally. Whether you need one sample unit or fifty, making sure that the part numbers match exactly—down to the differences between WAB and WBX frames—is what makes or breaks your first field installation.

FAQ

Q1: What is the difference between a Type A and Type B event in the AB cassette?

A: A Type A event occurs when the ATM rejects a note during the dispensing process — for example, due to a double-pick, thickness error, or counterfeit flag. A Type B event occurs when a customer fails to collect dispensed cash and the ATM retracts it. The cassette routes each note type into a separate internal bin, keeping the two populations isolated for auditing purposes.

Q2: Can I use a refurbished AB cassette for bank-audited ATMs?

A: Yes, provided the unit carries Japan-origin documentation and passes pre-shipment inspection. Many bank audit requirements focus on parts traceability, not condition. A refurbished cassette with verified part numbers and a test report typically satisfies those requirements.

Q3: What is the minimum order quantity?

A: RM accepts single-unit orders. This allows buyers to run a controlled field test before committing to larger volumes.

Q4: How long does shipping take?

A: Standard lead time runs 15–20 working days. Inquiries receive a response within 24 hours.

Q5: Which part number do I need for the WAB configuration?

A: For the WAB front frame, you need 1P004012-002. For the entry guide assembly, order 2P005409A. Always confirm your ATM's sub-series before ordering.

Get Your AB Cassette Quote from RM Today

For more than 20 years, RM has been selling ATM parts from its 3,000-square-meter factory in Shenzhen, China. The factory is ISO9001-2008 certified for R&D, production, and quality control. As a well-known AB cassette supplier, RM has both new and used units from Japan in stock, with a flexible minimum order quantity and a 30-day warranty. You can get a sample, check the part number, or emailing Tony directly at Tony@atm-part.com.

References

1. Hitachi-Omron Terminal Solutions Corporation. ATM Product and Service Transition Announcement. Hitachi Corporate Communications, 2018.

2. European ATM Security Team (EAST). ATM Crime and Fraud Statistical Report. EAST Annual Publication, 2022.

3. ATM Industry Association (ATMIA). Global ATM Market and Forecasts Report. ATMIA, 2023.

4. International Organization for Standardization. ISO 9001:2015 Quality Management Systems — Requirements. ISO, 2015.

5. Retail Banking Research (RBR). Global ATM Market and Forecasts to 2028. RBR London, 2023.

6. Cash Essentials. The Role of Cash in the Modern Economy: ATM Infrastructure and Maintenance Trends. Cash Essentials Annual Report, 2022.

Online Message

Learn about our latest products and discounts through SMS or email